POWDER COATED MR-1D Pre-Set Slip Type Torque Wrench Dr. 3-15 ft-lb DIRECT
| Part #: | MR-1D 1/2 | MR-1D 3/8 |
|
|
3-15 ft. lbs. | 3-15 ft. lbs. |
| Drive: | 1/2" | 1/2" |
| Length: | 9 5/8" | 9 5/8" |
| Height: | 2 3/8" | 2 3/8" |
| Weight: | 35 oz. | 35 oz. |
Seekonk "L" handle slip type torque tools extend fool proof versatility into a convenient "low profile" configuration. As with our other slip type tools, over torquing is impossible even with continued turning. Minimum head diameter design allows access into hard to reach areas. The unmatched performance and endurance exhibited by these tools are made possible by internal components produced on Seekonks state of the art CNC machining centers. Both the advanced design and production of these and all other Seekonk products are controlled by our ISO 9001 quality system.
Tools are pre-set at the factory to your requirements. Under normal use, yearly calibration is sufficient, however; routine calibration checks on a Seekonk Analog or PDTS electronic torque analyzer would be considered prudent. Standard accuracy +/- 4%.
NOTE: MR-1 & 2 also available in direct drive, Lock-up mode, or as torques left, ratchet right configuration on special order. MR-3 direct drive.
Related Products
.jpg)
